Carpentry & Timber Repairs — Vermont South & Melbourne's East
Practical timber work: replacing water-damaged skirting, repairing a rotten frame section, building shelving, fitting trims, slat panels and cupboard repairs. We repair where a repair will hold, and say so plainly when replacement is the sensible option.
Labour from $149
Labour prices shown are starting prices and include GST. Parts and materials are additional unless stated otherwise. For shorter standalone bookings, an $89 incl. GST small-job call-out applies; for bookings expected to require 3.5 labour hours or more, we waive it.
Common problems we fix
Damaged or rotting timber trims
Loose skirting or architraves
Small timber repairs inside or outside
We provide carpentry & timber repairs across our Melbourne eastern suburbs service area. Check your suburb.
Problem, usual cause and how we fix it
Soft or rotten timber at the bottom of a frame or trim
Usual cause: Water sitting against the timber over time
What we do: Cut out and replace the damaged section where practical, then seal and paint
Skirting or architrave pulling away
Usual cause: Loose fixings or movement in the wall
What we do: Refix securely, fill and touch up
Every job is checked first. The actual cause and price are confirmed with you before work starts.
What our carpentry & timber repairs usually include
Skirting, architrave and trim repair or replacement
Replacing rotten or damaged sections of timber
Shelving, cupboards, storage and slat panels
Cabinet, drawer and cupboard door repairs and realignment
Timber gates, steps, handrails and outdoor timber repairs
Filling, sanding and preparing new timber for paint
Not included
• Structural framing, load-bearing changes and anything needing engineering sign-off
• Termite treatment and pest control
• Timber floor sanding and polishing
• Regulated electrical, plumbing or gas work
Photos from this kind of job
Photos from our own jobs. Where work needs a licence or council approval, a licensed trade handles that part and we take care of the rest on site.
Cutting sheet material for a carpentry job
Timber framing set out on site
Cutting and building a timber slat panel
Water-damaged skirting removed and replaced
A real job we have done
Rotten Timber Window Sill — Repair or Replace?
Problem
A section of the timber window sill had deteriorated.
What we checked
Whether the damage was localised or extended through the surrounding frame.
Result
A sensible repair-versus-replacement decision was made based on the remaining sound timber, then the sill was repaired and repainted.
Chipped skirting, damaged trims and loose timber details are worth tidying where buyers will see them before a property goes to market. Pre-sale property repairs
Real customer examples
Loose Fascia Board Repair
The problem
A fascia board had come loose and needed securing before the problem got worse.
What we helped with
John repaired and secured the loose fascia board, paying attention to both stability and the finish.
Outcome
The customer praised the detailed workmanship and recommended the service.
Window Frame Patch, Sand & Paint
The problem
Window frames needed patching and refinishing, including some visible staining.
What we helped with
John patched, sanded and painted the affected window-frame areas.
Outcome
The customer highlighted the careful repair and finishing work.
Wobbling Fence Repair
The problem
A fence had become unstable and was moving out of position.
What we helped with
John secured the fence back into position instead of going straight to a replacement.
Outcome
The customer highlighted the accurate quote and the thorough work on site.
Rotten Decking Resurfacing
The problem
Existing timber decking had deteriorated and needed work.
What we helped with
The affected decking was repaired and resurfaced to improve its condition and appearance.
Outcome
The customer said the result exceeded their expectations and described the service as professional, honest and easy to deal with.
What affects the price of carpentry & timber repairs
Length and amount of timber being replaced
Whether matching profiles or timber species are available
Whether the damage extends past what is visible
Painting or staining after the repair
Photos help. Helpful photos: the whole item plus a close photo of the damage and the end profile of the timber, which helps us match it.
When more information is needed. Most small timber repairs can be estimated from photos. A site visit is the honest answer where rot may extend behind a wall or floor, or where the repair may be structural.
On-site assessment: from $129 incl. GST, only when needed. Credited in full towards the assessed, quoted job if you proceed. Larger assessments are quoted and agreed before booking. No small-job call-out is added to an assessment visit.
For shorter standalone bookings, the small-job call-out is $89 incl. GST. It is waived when the agreed scope is expected to require 3.5 labour hours or more, even if the work is completed faster.
Questions about this job
How much do carpentry repairs cost?+
Labour starts from $149, including GST. Parts and materials are additional unless stated otherwise. Pricing can be affected by the length and amount of timber being replaced, whether matching profiles or species are available, whether the damage extends past what is visible, and painting or staining after the repair. A starting price is not a fixed quote; the accepted quote sets the scope.
Is rotten timber always a replacement?+
No. A localised section may be cut out and spliced in where the surrounding timber remains suitable. If the rot has spread or the cause is ongoing water, we will tell you before you spend money on a repair that may not last.
Can you match our existing skirting profile?+
Often, yes. Send a photo of the cut end and we will tell you whether a stock profile is close or whether it needs to be made up. An exact match on aged timber may not always be achievable.
What small carpentry jobs do you do?+
Skirting, architraves and trims, rotten or damaged timber sections, shelving and storage, slat panels, cupboard repairs, and timber gates, steps and outdoor timber repairs.
Do you do structural carpentry?+
No. Structural framing, load-bearing changes and anything needing engineering sign-off are not included, and neither are termite treatment or floor sanding.